Flue Gas Treatment Systems

Wet scrubber

 

 

Intended use of wet scrubber unit is to remove gaseous pollutants like SO2 and HCl from the flue gas stream as well as particulate removal.

There are 3 mail wet scrubber applications:

  • Venturi Scrubbers
  • Spray Towers
  • Packed Bed Scrubbers

Among them venture scrubber is mainly used for the particulate removal while the other are used for acidic content removal.

In spray tower and packed bed scrubbers flue Gas is quenched with NaOH solution in this tower with the counter-current flow. Wet scrubber units has quite higher efficiencies on acidic pollutant removal than the dry scrubbers.

 

Venturi Scrubber Main Futures:

  • Able to remove particles with high efficiency
  • It has 3 main sections; namely, Convergent section, Venturi throat, Divergent section
  • Gas enters from the top of the unit and moves in the same direction with water
  • Main reduction is achieved in the throat section of the unit
  • For efficient removal gas is passing through the stack with very high speed.
  • There is a high pressure drop in this unit. The main reason is high speed difference through the venturi
  • Even small particles can be removed by venturi scrubber
  • In addition to the particle reduction, temperature decrease is achieved in the venturi scrubber
  • It has very high removal rates when it is compared with the other treatment methods

Spray Tower Main Futures:

  • Made of SS316 or FRP
  • Can resists high temperatures
  • Removal efficiencies of higher than 85%
  • High acid corrosion resistivity
  • Water is recirculated to minimize the water consumption and wastewater generation
  • pH of the system adjusted automatically
  • Caustic solution is used as a scrubbing agent
  • Lower pressure drop

Packed Bed Scrubber Main Futures:

  • Made of SS316
  • Can resists high temperatures
  • Removal efficiencies of higher than 99%
  • High acid corrosion resistivity
  • Water is recirculated to minimize the water consumption and wastewater generation
  • pH of the system adjusted automatically
  • Caustic solution is used as a scrubbing agent
  • Flue gas enters from the bottom of the unit and flows upwards
  • The water sprayed from the top of the unit flows downward and circulated
  • While water and flue gas creates countercurrent flow and interfere with each other